The Lifting Chair Has The Characteristic Of Flexible Operation

The lift chair refers to a new type of chair, which is made up of backrest, seat plate, bracket, bracket rocker arm, Take-off and landing device, chair foot composition, such as structure, lift chair bracket and chair foot between the bracket rocker arm hinged, hinged on the chair of the hinge axis for the center to rotate up and down, thereby effectively achieve the seat plate lifting, lifting chair divided into oil pressure, mechanical type, Air pressure three categories, because the lift Chair style difference, make the lift chair use way is also different, but no matter what style of lift chair will face down and so on, so how to reduce the lift chair method?

With the rapid development of social economy, the technology has been greatly improved, the lifting chair in the day-to-day office and study is a large number of use, in understanding the lift chair descent method between, first come to know the lift chair structure, lift chair chair height can be adjustable up and down, the chair face below a height to adjust the lifting device, Lift chair with low price, simple structure, flexible operation and other advantages, by the consumer's favorite and sought after, Lifting Chair about 80% office buildings, enterprises, companies use lift chair.

Lift Chair-Features

1. Lift Chair seat plate can be carried out between a certain range of take-off and landing, to a large extent, can meet the different height of the use of people.

2. The positioning device on the lift chair can be positioned at different heights to make the use process more secure and stable.

3. The seat plate of the lift chair can adjust the angle freely, Lifting Chair adapt to the different needs of reading, studying, writing, painting, designing and so on.

4. Lift chair in descending only need to directly sit up, give the lifting shaft a certain pressure, hold down the shaft so that you can gently decline.

Lift Chair-Lowering method

On the market more common lift chair has the pressure type, the spiral, the lift chair in the use process according to the style type, the material, the structure and so on difference, causes the lift chair descent method to be different.

1. Lift chair: is a new type of chair, internal device has a cylinder, Lifting Chair cylinder inside the piston rod up and down movement dominate the swivel chair take-off and landing. Air pressure rod filled with nitrogen, but if the gas purity of less than 90% lift Chair in the use of the process there may be a safety hazard, air pressure rod seals will also cause gas burst out, (must buy a qualified lift chair). Lifting Chair When the lift chair falls down, the person sits on the chair and lifts up the lever in the lower part of the chair, using the body weight can easily achieve the descent.

2. Free Air Spring lift chair: In the structure is relatively simple by the airtight cylinder, the cylinder piston, extends to the outside piston rod composition. The air pressure in the cylinder is much larger than the outside, and the piston inside the cylinder is connected with a small hole. Lifting Chair According to the Middle school physics knowledge, the pressure of the piston rod is constant. At this point, you can easily realize the upper and lower movements of the lift chair by moving up and down the lever.